Introduction

Based on the latest European technology,VSI5X series crusher machine is the latest generation products with many production proprietaries .And it is the paragon combination between the crushing technology and mechnical manufacturing ,which have fully present the new technology and crafts.

 

PDF Download !

VSI5X series crusher machine can not only provide the quality sand-stone aggregates for the field of Highways, high-speed railway, high-rise buildings, municipal engineering, hydropower dam construction, port terminals, concrete mixing station,etc.

VSI5X Series Crusher Machine Working Principle

Feeding at center: The materials fall down into the feeding hopper ,and then enter the high speed impeller through the central feeding hopper ,and at last they will be thrown out from the impeller.The materials strike with the materials that are freely falling down , then crush togetherly to the vortex liner and are rebounded to the top of vortex cavity ,and then falling down. The falling materials with the shoot materials form a continuous materials curtain .After several this kind of repeating , the final materials will be discharged from the discharging opening . Feeding both at center and sides: Raw materials enter the feeding hopper and fall down through the circle ring, and then they are divided into two divisions by the distributing plate. One enters the high speed impeller and then they will be accelerated and thrown out from the impeller. The other falls down from the sides of distributing plate. Then this two kinds of materials will crush with each other, and then strike togetherly to the vortex liner and are rebounded to the top of vortex cavity ,and then falling down. The falling materials and the shoot materials will form a continuous material curtain .After several this kind of repeating , the final materials will be discharged from the discharging opening .

VSI5X Series Crusher Machine Working Feature

1.Optimized deep-cavity rotor improve the material throughput by 30%.
2.Part-worn around protecting plate can be reversed end for end to use again ,which can improve the operating factor and extend the service life over 48% .
3.Assembled hammer reduces the cost by more than 30%. In addition, adding the assistant hammer which protects the frame when the main hammer is worn.
4.And the core wear resistant material adopts the American high-standard wear resistant material.
5.Adopting the lozenge impact plate protects the frame better.
6.Adopting international famous brand bearing from Japan, Sweden, America and so on.
7.Advanced shoot opening and fluent inner curve reduce the flowing resistance which improve the throughput by large extent.
8.Convertible distributor simplifies the operation.
9.Air proof structure of main axle end avoids oil leaking without felt washer.
10.The hydraulic uncap assembly adopts Japanese imported with original packaging parts which make the maintenance easier and more convenient.
11.Adopting high protection standard motor with high efficiency and low noise,the motor conform to the IEC standard, F insulation, IP 54/55 protection standard.

VSI5X Series Crusher Machine Advantages

1. Optimized deep-chamber rotor, increasing the material throughput by 30%
2. Reversible protecting plate
3. Built-up hammer
4. Impact block in diamond shape
5. Quality bearings from Japan, Sweden and U.S.
6. Choice hydraulic pressure-driven uncapping device imported from Japan
7. High protection standard motor with high efficiency and less noise

VSI5X Series Crusher Machine Technical Parameters

Model		VSI5X7615	VSI5X8522	VSI5X9532	VSI5X1145
Throughput capacity(t/h)	Feed both at center and sides	150~280	240~380	350~540	500~640
	Feed	70~140	120~200	180~280	250~360
Max Feeding Size(mm)	Soft materials	<35	<40	<45	<50
	Hard materials	<30	<35	<40	<45
Rotation speed(r/min)		1700~1900	1500~1700	1300~1510	1100~1310
Double motor power(KW)		110~150	180~220	260~320	400~440
Overall dimension L*W*H(mm)		4100*2330 *2300	4140*2500 *2700	4560*2600 *2900	5100*2790 *3320
Weight(t)		8.6	11.8	17.5	27.5
Power supply		380V , 50Hz
Light-oil lubrication station	Power of double lubropump motor	2*0.31 KW
	Safety protection	Double complementary lubropumps supply oil.Auto-stop without oil flow.Water-cool system.Motor-heating for winter.
	Oil-tank heating power	2 KW
	Overall dimension L*W*H(mm)	820*520*1270

Note: This specification is just for reference, any changes are subject to the products.

 

Get Price

Welcome to Shanghai Shenbang Crushing equipment Co.,Ltd.!
And please leave me a message with the following forms if you feel interested about our products .We will contact you as soon as possible and provide you the products quote your required .Last but not the least is we promise your confidential information !

 

Enquiry Title:

Your Name: *

Your Phone:

Your Email: *

Your Enquiry: *